New Honeywell Thermostat Blowing Hot Air On Cool Solved

If you have a New Honeywell Thermostat and it’s blowing hot air on the cool setting, don’t worry. This is a common issue that can be easily fixed. The most likely cause is that the thermostat is not set to the correct mode.

To fix this, simply switch the thermostat to the heat mode and then back to the cool mode. This will reset the thermostat and should fix the problem.

If your new Honeywell thermostat is blowing hot air on cool, there’s a simple fix. Just open up the thermostat and switch the wires around. It’s a common problem caused by a manufacturing error, and it’s an easy fix that takes just a few seconds.

Why is my Honeywell thermostat blowing hot air instead of cold?

If your new Honeywell thermostat is blowing hot air on the cool setting, there are a few potential causes. First, check to see if the batteries are fresh and installed correctly. If the batteries are low or installed incorrectly, the thermostat may not function properly.

Secondly, check to see if the thermostat is set to the correct mode. If it is set to heat mode, it will blow hot air. Be sure to set it to cool mode.

Finally, check the temperature settings. If the thermostat is set too low, it may take longer for the unit to cool the room down. Adjust the temperature accordingly and see if that solves the problem.

Why is my Honeywell not blowing cold air?

If you have a new Honeywell thermostat and it’s blowing hot air on the cool setting, there are a few things you can try to fix the issue. First, check to make sure that the thermostat is set to cool mode. If it is, then the next thing to check is the temperature setting.

Make sure that the temperature is set below the current room temperature. If it is, then the third thing to check is the fan setting. Make sure that the fan is set to “on.”

If it is, then the fourth thing to check is the battery. If the battery is low, it could be causing the thermostat to malfunction. Try replacing the battery and see if that fixes the problem.

If not, then the fifth thing to check is the wiring. Make sure that all of the wires are securely connected. If they’re not, then that could be the cause of the problem.

How do I fix my Honeywell thermostat not cooling?

If you have a New Honeywell Thermostat and it is blowing hot air on the cool setting, there are a few things that you can do to try and fix the issue. First, check to make sure that the batteries are fresh and that the unit is properly plugged in. Next, try resetting the unit by pressing the “Hold” button for three seconds.

Finally, if the unit is still not working properly, you may need to contact Honeywell customer service for further assistance.

How do I make my Honeywell thermostat cooler?

If you have a New Honeywell Thermostat and it is blowing hot air on the cool setting, there are a few things that could be causing the issue. First, check to make sure that the batteries are properly installed and that the thermostat is set to the correct mode. If the issue persists, it is likely that the thermostat itself is defective and will need to be replaced.

Honeywell thermostat set to cool but heating

If your new Honeywell thermostat is blowing hot air on the cool setting, there are a few possible causes. First, check to make sure that the thermostat is set to cool mode and not heat mode. If it is set to heat mode, the thermostat will blow hot air.

Next, check the temperature setting. The thermostat should be set to a temperature that is lower than the current room temperature. If the thermostat is set too high, it will blow hot air.

Finally, check the batteries. The thermostat may be blowing hot air because the batteries are low. Replace the batteries and see if that fixes the problem.

If none of these solutions work, contact Honeywell customer service for more help.

Honeywell thermostat not showing cool option

If your new Honeywell thermostat is blowing hot air on the cool setting, there are a few possible causes. First, check to make sure that the thermostat is set to “cool” and not “heat.” If it is set to “heat,” the thermostat will blow hot air.

Second, check to see if the thermostat is set to the correct temperature. If the thermostat is set too low, it will blow hot air. Finally, check to see if the thermostat is in the “auto” mode.

If it is in the “on” mode, the thermostat will blow hot air. If you have checked all of these things and the thermostat is still blowing hot air, please contact Honeywell customer service for further assistance.

Thermostat says cool on but no air

If your new Honeywell thermostat is blowing hot air on the cool setting, don’t despair! There are a few possible reasons for this problem, and thankfully, there are also a few possible solutions. One reason why your thermostat may be blowing hot air on the cool setting is because it is not properly calibrated.

To fix this, simply recalibrate your thermostat according to the instructions in your user manual. Another reason for this problem could be that your thermostat is set to “Auto” instead of “On.” When the thermostat is set to “Auto,” it will automatically switch between heating and cooling mode, depending on the temperature in the room.

However, if you want your thermostat to blow cool air all the time, you need to make sure it is set to “On.” Lastly, it is possible that your thermostat is simply defective.

Honeywell thermostat stuck in delay mode

If you have a New Honeywell Thermostat and it’s blowing hot air on the cool setting, don’t worry, there is a fix! First, check to make sure that the batteries are fresh and installed correctly. If that doesn’t solve the problem, try resetting the thermostat by flipping the switch from “Off” to “On” and then back to “Off.”

Finally, if those steps don’t work, you can try recalibrating the thermostat by following these instructions: 1. Press and hold the “Set” button for 5 seconds. 2. Use the up or down arrow keys to set the desired temperature.

3. Press the “Set” button again to save the new setting. If you’ve tried all of these steps and your thermostat is still blowing hot air, please contact Honeywell customer service for further assistance.

Honeywell thermostat not working

If you have a New Honeywell Thermostat and it is blowing hot air on the cool setting, there are a few things that you can do to fix the problem. First, check to make sure that the batteries are fresh. If the batteries are low, the thermostat may not be able to properly control the temperature.

Next, check the settings on the thermostat. Make sure that the thermostat is set to cool and that the temperature is set below the current room temperature. If the thermostat is set properly and the batteries are fresh, the next step is to clean the thermostat.

dirt and dust can build up on the thermostat and cause it to malfunction. Finally, if the thermostat is still not working properly, you may need to replace it.

Honeywell thermostat cool on blinking

If your new Honeywell thermostat is blowing hot air on the cool setting, there are a few possible causes. First, check to see if the thermostat is set to heat mode instead of cool mode. If it is, simply switch it to cool mode and see if that fixes the problem.

If the thermostat is already in cool mode, the next step is to check the battery. If the battery is low, it can cause the thermostat to blow hot air. Replace the battery and see if that fixes the problem.

If the battery isn’t the issue, the next step is to check the furnace. If the furnace is set to heat instead of cool, it will cause the thermostat to blow hot air. Set the furnace to cool and see if that fixes the problem.

If none of these solutions work, there may be a problem with the thermostat itself.

Honeywell pro series cool on blinking

If your new Honeywell thermostat is blowing hot air on the cool setting, there are a few possible solutions. First, check to make sure that the thermostat is set to cool mode and not heat mode. If it is set to heat mode, the thermostat will blow hot air.

Second, check the settings to make sure that the temperature is set correctly. If the temperature is set too high, the thermostat will blow hot air. Finally, check the batteries.

If the batteries are low, the thermostat may not work properly and could blow hot air.

How to set honeywell thermostat to cool

If your new Honeywell thermostat is blowing hot air on the cool setting, don’t panic! This is a relatively easy problem to solve. Simply follow these steps:

1. Check the batteries. If the batteries are low, they may not be providing enough power to the thermostat. Replace the batteries and see if that solves the problem.

2. Check the settings. Make sure that the thermostat is set to the correct mode (cooling) and the correct temperature. Sometimes simply changing the settings can solve the problem.

3. Check the vents. If the vents are blocked, that can cause the thermostat to blow hot air. Remove any obstructions and see if that solves the problem.

4. Check the air filter. A dirty air filter can cause the thermostat to blow hot air. Replace the air filter and see if that solves the problem.

5. Check the furnace.

Conclusion

If your new Honeywell thermostat is blowing hot air on the cool setting, there are a few possible causes. First, check to see if the batteries are fresh and installed correctly. If the batteries are good and installed correctly, the next step is to check the thermostat’s settings.

Make sure the thermostat is set to “cool” and that the temperature is set below the current temperature of the room. If the settings are correct and the thermostat is still blowing hot air, there may be a problem with the thermostat itself and you should contact Honeywell customer service for assistance.